Zimo DCC equipment

(remember: links to sub-pages at the bottom of this page)

click here to jump to the bottom for these links

Overview:

Some of the highest quality DCC equipment made. Quality components, connectors, huge software capability, tons of features. Also one of the most expensive systems made!

Very high featured, both the decoders and the DCC control systems, but can be complex, and hard to figure out since the stuff is made in Austria, and documentation is a so-so translation to English, and the English translations always lag significantly behind hardware and software releases, often up to a year!

There are not many US users, but we have what I believe the largest Zimo forum, with many experts, both US and internationally.

Come one over and join: https://groups.io/g/ZIMO-DCC 

Decoder hardware & firmware

The decoders themselves are are priced competitively, amazingly, I use Z, HO & G decoders. The number of functions on the decoders is high, and servo drive and lots of function outputs and a lot of capability is available.

Unlike many other brands, they can honestly handle the advertised current they state and are very reliable. The sound amplifiers are all class D. 

In Z scale, some of the best motor control around, very useful for the pesky Marklin motors that draw so much current and cannot be smoothly controlled by other decoders.

The sound decoders are normally too large for Z scale, but when you can fit them, they are nice.

In G scale, The new MS990 series has 6 amps, dual 10 watt sound amps, 16 bit sound and 15 outputs. Small locomotives, speeders, trolleys and similar can be handled with some of  the HO decoders.

Lots of options, "direct drive" for smoke unit heater and fan, syncs with motor speed or steam chuffs, up to 4 servo outputs, screw terminals.

Decoder sound files

For decoders, for years, the sound library was pretty thin for American locos, and the hardware design is the old school design in terms of "speed groups" of sounds, you can define up to 10 groups of sounds (chuff, prime mover, etc), and then have the decoder switch through these groups as speed increases. If you are going to create sound files yourself this can be a lot of work. The ability to make your own sound files is an OK feature, but nowadays, other manufacturers have extensive sound libraries, and there are many sounds in a locomotive. Basically you have to LOVE making sound files to do anything yourself that will sound good.

Originally, there were hardly any American sound files, and all the steam files seemed to be re-incarnations of the K27 file. But, recently, in 2016, a lot more American sound files have become available, developed by a guy in Europe. The decoders have a way to authenticate the purchased sound file to your decoder. The situation has thus improved a lot, and is one of the best ones out there.

Visit the Zimo site   http://www.zimo.at/web2010/sound/tableindex_EN.htm and browse the sound files available and which cost money and decide for yourself.

Command Station and handheld throttles/cabs

Yes, the Zimo DCC control system is expensive, pretty much the most expensive in the world, although the new MX10 command station/booster is the highest powered system available (20 amps) and has features unmatched anywhere. The cost for the MX10 and 2 MX32FU wireless cabs is almost $3,000.

I considered changing from my beloved NCE equipment to Zimo for some time. I purchased a Zimo system in 2015 and am still learning it, BUT it is STILL running on what I call beta software, since some major functions are incomplete. Basic consisting was first supported just before Christmas in 2016, more than a year later.

Why did I change from the great NCE system? Mainly because I need over 10 amps per power district, and I felt that Zimo has more development going on with new products and the firmware is USB upgrade. From what I could tell, the system was more flexible and more modern. From my viewpoint, this was the right decision, there is more development going on than any other DCC system manufacturer in terms of bug fixing and adding advanced features.

In addition, I figured I might also use some of the other features. The ability to upgrade the command station and cabs myself from a usb stick was very attractive.

So, while I am struggling with the missing functions, and sometimes overly complex structure, I love my system and am happy I decided to "step up" to Zimo.

Where next?

Follow the links below to explore decoders or the MX10/MX32 DCC system.

Sub-Pages

  MX10 system & MX32FU cabs     Zimo decoder programming tips     MXULF Programmer   Zimo Resources 

 

Weather Underground PWS KCACARLS78