Common configuration tasks

Changing function buttons to momentary

  • E + 5  enters function key setup
  • select function key you want to modify by pressing it, you will get a set of brackets around the key
  • press TP so you get a red square in the upper left of the function picture
  • terminate with the F key (not that function key)... that writes the changes

 

Configuring the switch commands

  • So if you go E + 3 you are in some bizarre programming screen, not where you set the 2 addresses required for each accessory decoder address.
  • use shift  + W and you will enter
  • in the E + 3, you need a line per accessory... ignore the 4 boxes

 

 

Weather Underground PWS KCACARLS78