Titan Q2FX & ET sound files

Overview

This page is for the sound files that can be used in a QSI Titan

The Titan decoders can accept two kinds of files:

    • Q2-FX (the original Revolution sound files updated to work with the Titan)
    • ET - Emulator Technology

There are a ton of advantages to using an ET sound file, read here:

https://shedaker.wixsite.com/shedaker/emulator-technology-sound-files

I've added some notes on some of the sound files, some of the files have abnormally low or high levels default.

Also note well: You cannot use the original Q2 files, they must be Q2 files updated for the Titan.

Don't experiment with the wrong files for your Titan!

File name conventions:

By QSI convention, There is a model number (usually 4 digits), then a soundset number (some customization, usually horn/whistle/bell), and then a revision (major-minor-build).

Not all files follow this, and also older files may not have a subversion.

I further prepend the hardware version number on the file, because people are constantly trying to load files into the wrong hardware, the update program will tell you what hardware the file is for.

LS Titan Sound files

1101-200 - Q2FX - ALCo

Sound File # 1101-200
Version 8.9.1

Titan ET Replacement File(s)

1127-244

1101-300 - Q2FX - Baldwin

Sound File #1101-300
Version 8.9.1

Titan ET Replacement File(s)

None Yet, Coming Soon!

1101-400 - Q2FX - EMD

Sound File #1101-400
Version 8.9.1

Titan ET Replacement File(s)

1132-567, 1141-645

1101-500 - Q2FX - Fairbanks Morse

Sound File #1101-500
Version 8.9.1

Titan ET Replacement File(s)

None Yet, Coming Soon!

1101-600 - Q2FX - GE

Sound File #1101-600
Version 8.9.1

Titan ET Replacement File(s)

None Yet, Coming Soon!

1101-680 - Q2FX - Winton

Sound File #1101-680
Version 8.9.1

Titan ET Replacement File(s)

None Yet, Coming Soon!

1115-11 EMD 567 hood unit

sound file 1115-567

version 9-3-2

proto locos: SW1-1200, NW2, GP7-35, dual motor vairent dd35

e8 - dual emd motors ??

 

 

1121-720/721 - Q2FX - BUDD RDC

Budd RDC

Sound File #1121-721
Version: 8.9.1

Titan ET Replacement File(s)

None Yet.

1123 - Alco 244???

 1123-244

version 9-3-2

proto

RS-2/3, FA/B, PA/B

1127 - ET - ALCo 244

Sound File# 1127-244

version: 9-3-2

Prototype Locomotives: 

RS-2/3, FA/B, PA/B 

1128 - et - GE FDL12

sound file number 1128-FDL12

version 9-3-2

proto locos: U23/U26, dual motor variant U50c

1131 - ET - GE FDL12

Sound File# 1131-FDL12

version: 9-3-2

Prototype Locomotives: 

B30-7, B36-7, C30-7,

Dash 8-36b - Dash 9-44cw,

P40-42

1132 - ET - EMD 567 Hood Unit

Sound File# 1132-567

version: 9-3-2

Prototype Locomotives: 

SW1-1200, NW2, GP7-35, 

Dual Motor Variants: DD35

1133 - et - GE FDL16 (old style)

sound file 1133-FDL16

version 9-3-2

proto locos: U25C, U28-U36, Dual motor variant U50 (see 1144-U50 for Athern U50)

1134 - ET - GE FDL16 (Old Style)

Sound File# 1134-FDL16

version: 9-3-2

Prototype Locomotives: 

U25C, U28-U36

Dual Motor Variant: U50*

See 1144-U50 for Athearn U50

1135 - et - Alco 251

1135-251

verison 9-3-2

protio loco

S5/6, T6, RS10-36, C-series, M-series dual motor varient C855

1136 - ET - ALCo 251

Sound File# 1136-251

version: 9-3-2

Prototype Locomotives: 

S5/6, T6, RS10-36, C-Series,

M-Series

Dual Motor Variant: C855

1137 - cummins hbi-600

sound file# 1137-600

version 9-3-2

proto locos: GE 45 tonner & other small GE switchers. Dual motor varient: same locos

1138 - ET - Cummins HBI-600

Sound File# 1138-600

version: 9-3-2

Prototype Locomotives: 

GE 45 Tonner and other small GE diesel switchers.

Dual Motor Variant: GE 45 Tonner and other small GE diesel switcher

1140- et - emd 645

sounf file 1140-645

version 9-3-2

proto locos: SW1500, MP15, GP15, GP38/40/50, Dual motor varient DD40

 

1141 - ET - EMD 645

Sound File# 1141-645

version: 9-3-2

Prototype Locomotives: 

SW1500, MP15, GP15,

GP38/40/50, SD38/40/50

Dual Motor Variant: DD40

1142 - et - GE 7FDL16 (modern)

sound file 1142-7FDL16

version 9-3-2

proto locos b30-7, b36-7, C30-7, Dash 8-36b - Dash 9-44cs, P40-42

1143 - ET - GE 7FDL16 (Modern)

Sound File# 1143-7FDL16

version: 9-3-2

Prototype Locomotives: 

B30-7, B36-7, C30-7,

Dash 8-36b - Dash 9-44cw,

P40-42

1144 - et - Dual GE FDL16A Athern U50

sound file 1144-U50

version 9-2-11

proto locos dual motor variant U50, all cvs are prefefined for the atheran U50 loco

1145 - et - fairbanks morse 38d-6

sound file 1145-38d6

version 9-3-2

proto locos: H10/12-44

1146 - ET - Fairbanks Morse 38d-6

Sound File# 1146-38D6

version: 9-3-2

Prototype Locomotives: 

 H10/12-44

1148 - ET - ALCo 539

 1148-539

ersion 9-3-2

proto locos

S1-4, HH series switchers, RS-1, Dual Motor variant: DL-109

 

1150 - ET - ALCo 539

Sound File# 1150-539

version: 9-3-2

Prototype Locomotives: 

S1-4, HH series switchers, RS-1, 

Dual Motor variant: DL-109

1157 - et - emd 710

sound file 1157-710

version 9-3-0

proto locos: GP59/60, SD60/70/75/80/90, dual motor varient: none

1158 - ET - EMD 710

Sound File# 1158-710

version: 9-3-0

Prototype Locomotives: 

GP59/60 SD60/70/75/80/90

Dual Motor Variant: None

1161-567 emd 567 cab unit

sound file 1161-567

version 9-3-2

proto locos: FT, F-units, CF7, BL2, Dual motor varient: none

1162 - ET - EMD 567 Cab Unit

Sound File# 1162-567

version: 9-3-2

Prototype Locomotives: 

FT, F-Units, CF7, BL2

Dual Motor Variants: E-Units

1164 - et - budd rdc as delivered

sound file 1164-720

version 9-3-4

proto locos: as delivered RDC1,2,3,4

1164 - et - New haven varient

sound file 1164-721

version 9-3-4

proto locos, new haven varieant RDC 1,2,3,4 with Hancock Air Whistle

1165 - ET - Budd RDC - 721

Sound File# 1165-721

New Haven Variant

Prototype Locomotives: 

New Haven RDC with Hancock Air Whistle

 

1165 - ET - Budd RDC - 720

Sound File# 1165-720

version: 9-3-4

As Delivered Variant

Prototype Locomotives: 

As Delivered RDC 1, 2, 3, 4

1169 - et - winton 201a

sound file 1169-201

version 9-3-6

proto locos Zephyrs, EMS SC, model 90, sw, nC-nc2, T, NW, TA, Dual motor varants Ea, E1, E2, ATSF1, ATSF 1a, B&O 50

1170 - ET - Winton 201a

Sound File# 1170-201

version: 9-3-6

Prototype Locomotives: 

Zephyrs, EMC SC, Model 90, SW, NC-NC2, T, NW, TA

Dual Motor Variants: EA, E1-E2, ATSF 1, ATSF 1a, B&O 50

2101-730 - Q2FX - ELECTRIC

Sound File #2101-730
Version: 8.9.1

Titan ET Replacement File(s)

None Yet. Coming Soon!

3101-801 - Q2FX - SMALL STEAM

Small Steam

Sound File#3101-801
Version: 8.9.10

Titan ET Replacement File(s)

3111-0

3101-802 - Q2FX - MEDIUM STEAM

Medium Steam

Sound File#3101-802
Version: 8.9.10

Titan ET Replacement File(s)

3111-0

3101-803 - Q2FX - LARGE STEAM

Large Steam

Sound File#3101-803
Version: 8.9.10

Titan ET Replacement File(s)

3111-0

3104 -???

3107-0 - Q2FX - Bachmann K27/C19

Sound File#3107-0 - Version: 8.9.10

I raise whistle to 90% and bell to 80%, they come quite low.

Titan ET Replacement File(s)

None Yet, Coming Soon

3107-1- Q2FX - Bachmann Climax

Sound File#3107-1
Version: 8.9.10

Titan ET Replacement File(s)

None Yet, Coming Soon

 3107-2 - Q2FX - Bachmann Forney

Sound File#3107-2
Version: 8.9.10

Titan ET Replacement File(s)

None Yet, Coming Soon

3110-0 et - 2 cylinder steam

sound file 3110-0

version 7-0-176

proto locos - all 2 cylinder steam from 0-4-0 to 2-10-4

 

3111-0 - ET - 2 cylinder steam

#3111-7, ver 7-0-176

raised whistle to 90, bell to 80

4101-801 - Q2FX - ARTICULATED

Articulated Steam

Sound File #4101-801
Version: 8.9.10

Titan ET Replacement File(s)

4111-0

4103-0 - Q2FX - Bachmann 2-6-6-2T - NO DOWNLOAD

Sound File#4103-0
Version: 8.9.10

Titan ET Replacement File(s)

None Yet, Coming Soon

4110-0 - et - 4 cylinder steam (articulated)

sound file 4110-0

version 7-0-176

proto loco - all 4 cylinder steam (articulated) from 2-4-4-2 through 2-10-10-2

4111-0 - ET - 4 cylinder steam

 

5101-760 - Q2FX - GAS TURBINE

Sound File #5101-760
Version: 8.9.1

Titan ET Replacement File(s)

None Yet.

 

 

Bellmaster & Hornmaster:

These capabilites are in all Q3 diesel files. To take advantage of all the features like building your own horn, you need to use the Quantum CV Manager.

Headend power:

This is a little known feature that simulates a HEP prime mover. Head End Power gets assigned to a function Key, only assignable to NFF/NFR (you can't engage it while moving) loco will then behave just like a loco in HEP. Motor will be in N8 at all times and the only indication of notch change is the exhaust comes up in volume while the change is happening. If the loco is stationary long enough to go into low idle, it instead drops to N2 as is prototypical. Frankly, it makes the model boring as hell, but accurate. 

 

 

Weather Underground PWS KCACARLS78