QSI O scale Titan

This page is under construction.

 

I've got to add the currrent handling specs, 

 

There are 12 lighting outputs, including one that is high current for a smoke heater element

FX DO General View scaled

Naming the connectors: (Please ignore the wire colors, apparently there were several versions of harnesses supplied.)

P1, pin one is in the extreme upper right of the above and below pictures. It has 8 pins.

P2, pin 1 is next, in both pictures this is a green wire. It has 8 pins.

Next are two 2-pin connectors, these 

 

 FX DO Original Pinouts scaled

 

I'm working on a "translation" that maps the ports as defined in the manual to the wires on the top 2 connectors

(most of this information from Jerry Davis, thanks!)

 

 

Quantum Titan
manual port #		FX-DO port #
per O scale docs		 FX-DO plug /
 pin number		 FX-DO
 wire color		 Notes
The FX-DO port number is actually meaningless
UPPER BOARD    
 L10 L1 P1-1 red 
 L11 L2 P1-2 orange 
 L12 L3 P1-3 blue 
 L5 L4 P1-4 white 
 L6 L5 P1-5 yellow 
 L7 L6 P1-6 gray 
 +5V  P1-7 black 
 GND  P1-8 violet 
 L8 L7 P2-1 red 
 L1 L8 P2-2 orange 
 L2 L9 P2-3 blue 
 L3 L10 P2-4 white 
 L4 L11 P2-5 yellow 
 L14 L12 P2-6 gray High current smoke 
 +5v  P2-7 black 
 GND  P2-8 violet 
   P5-1  speaker 2 plus
   P5-2  speaker 2 minus
   P6-1  speaker 1 plus
   P6-2  speaker 1 minus
   P6-1 +5v
   P6-2 chuff cam
   P6-3 gnd
   P12-1  reed switch (for reset/programming)
  P12-2 gnd for reed (convenience)
LOWER BOARD    
   P1-1 red track right
   P1-2 black track left
   P1-3 orange motor plus
   P1-4 brown motor minus
  P2 - see note  duplicate of P1, so dual pickups and dual motors easy to connect
  P3 - see note  4 pin connector labelled: DL - unknown
  P5 4 wire connector for G-Wire flat cable
   P6  smoke heater
   P6  smoke ground
   P14 labelled: DL (may be addional connection for extra lighting co-processor, or perhaps high speed DL port

 

h

Weather Underground PWS KCACARLS229